Category: Tree Care

Posted on

Frequently Asked Tree Trimming Questions

When it comes to tree trimming frequently asked questions, the first question I always get is if you can leave a light during the entire process. Well, technically, yes you can do that. However, it’s usually considered better to leave the tree trimming (or tree pruning) light on in order to prevent any damage. For those who are not so keen about that, let me give you some of the things you can do for a safe trimming job.

When you first look at your tree, your first thing should be to check if there are any damaged areas. This may involve getting a metal probe and checking the damage. If there are any blemishes, contact a tree expert immediately. A fast response would be better than just leaving the tree cut and some time will be lost if something happens later.

Once you’ve found the damaged areas, it’s time to go and remove them. The simplest way of doing this is to use a special tool called a trigger. It would consist of a long metal rod or shank, which would be inserted into the damaged areas and the end would have to be locked with a screw that is connected to the trigger mechanism.

Once the area is free from the big mess, the next step would be to apply the compound that is used in tree trimming. As much as possible, make sure you use a weed or grass killer that you can use either by spraying it or by applying it using a water bottle. Be careful because you don’t want any unwanted effects by spraying too much.

Repetition is also very important if you want to know the length of time required for a successful trimming. You should only trim once or twice every three years in order to avoid dead growth. The more you trim, the faster the tree would grow, so trimming periodically will help prevent the need to maintain certain areas.

In order to know if the tree is able to bear the latest trimming tool, the trimmer itself should be examined first. Usually, a person looking for a new or a pre-owned trimming tool will look for a few things like how many times has it been used, how often does it take to be used, if it’s easy to use and if it’s made out of strong material.

Finally, when it comes to tree trimming frequently asked questions, what I really mean is that there are a lot of factors that are involved in tree trimming. And with that being said, there are some things you need to consider before you start trimming. So read these frequently asked questions before you begin trimming.

Call the tree service Huntsville AL trusts for quality tree trimming and general tree care:  Stallworth’s Tree Service Huntsville, 4910 Commercial Dr NW, Huntsville, AL 35816,  256-277-1647,

 

Posted on

A Guide to Land Clearing

Land clearing tree service
Backhoe operating to clear trees and brush for a construction site.

If it comes to land clearing, you’re going to want to work with a severe contractor. Land clearing is significant, it makes certain that your landscape appears neat. Land clearing is quite an extensive subject that covers many diverse kinds of jobs and methods. Land clearing needs to be achieved in a particular order so your preferred end result is obtained. Land clearing requires the removal of trees and brush on a sheet of land. Different types of land clearing Controlled burn-this is just one of the most dangerous techniques and involves starting and keeping up a controlled fire.

The proximity of protected organic habitats and woodlands may also make it even more challenging to take on the work in a timely manner without initially getting the appropriate authorization. You may believe that clearing a place of land is a relatively straight forward, do-it-yourself job but clearing can get complicated very fast. If you reside in a location that’s often below a forest fire advisory, land clearing can provide some peace of mind. Clearing the land has a lot of negative results on the ecosystem. clear land provides free consultations. There are many ways to clear land, but just a few are practical for most people. Clearing land for the usage of urbanization will hurt the surroundings in the future.

You can procure the forestry and agricultural equipment financing immediately after applying for the loan as long as you have the minimal qualifications to get the loan. Forestry and agricultural equipment financing are the ideal approach to overcome the issue of absence of money. Therefore it is required to buy the essential equipments. Therefore, it is required to buy the essential equipments. If livestock is the plan, be certain that you’ll have the appropriate quantity of space and climate to support the kind and quantity of livestock you wish to raise.

The Importance of Land Clearing

If you’re unsure, speak to the business in question! The organization has a number of the high-quality land clearing machines on the marketplace. Many businesses have help lines or e-mail addresses in which you are able to reach them. Our company has updated to wood chippers which use razor-sharp planner teeth for projects which don’t consist of rocky ailments. On the flip side, landscape businesses, although dealing with land and plants, require a totally different set of equipments. By clearly identifying the issue you’re having will let you clarify what kind of tree provider is needed to acquire the task done properly. In many instances, it’s much better to seek out the assistance of a professional land clearing company by using ImproveNet’s internet search function.

What You Don’t Know About Land Clearing

If you would like to develop into a successful investor in realty regardless of the daunting economy and the disappointing state of the actual estate business, here are a number of tricks employed by the previous pros of the game so as to get in front of the present buying or selling trends instead of merely chasing them. Consequently, forestry investments are the sole green initiatives, which, if properly adapted, may have a multi-purposeful small business potential. Nobody will lend money to you unless the lending company is assured of your ability to pay back. Just take the time to find out more about what land clearing entails and the possible costs involved. The charge to clear a place of land in preparation for building work varies greatly based on the size and range of the undertaking. Afterwards, you should double-check to see whether the typical home price is costlier than in other surrounding towns too.

Posted on

Five Methods to Remove a Tree Stump

After eliminating a tree, you will have another thing to think about: removing its stump. You can wait for the stump to naturally decay, but it would take ages, and you don’t want to keep the stump for too long. No matter what your reason is for removing the stump, you have to understand that it is not easy as it seems. But the good thing is, you can choose from five basic (and effective) methods to get rid of a stump. 

One popular method to remove a stump is by fastening the stump to a four-wheel-drive truck and pulling it out. We don’t recommend this approach because it can damage your car while still leaving the stump in place. 

Chemical Tree Stump Removal

You can purchase chemical products that speed up the rotting process of a stump at any home garden centers. These products generally contain potassium nitrate known to hasten decomposition process. Also, chemical fertilizers with high nitrogen content aid the rotting process by producing bacterial growth in the stump. You need to drill holes into the stump, fill them with chemical mixed with, and allow the process to take its course. Once the chemical has been full-absorbed by the stump, it will become soft and ready for breaking up. Remove the stump using an ax or a pick-ax. Be careful not to leave children and pets within the range of the stump while letting the chemicals take its full effect. 

Mechanical Removal With a Tree Stump Grinder

Keep yourself safe when using a stump grinder by wearing proper safety gear. Wear pants, long sleeves, steel toe boots, and safety glasses. A stump grinder is a machine used to get rid of unwanted stumps. Its major part consists of the cutting blade that can grind the stump into small pieces. Clear away any rocks and other particles around the stump before getting into the task. Reduce most parts of the stump using a chainsaw. The grinder cuts 3 inches of the stump in its every swing. Using a stump grinder is the best way to remove a stump when you have several stumps to eliminate. Stump grinders can be rented from garden supply centers or hire a landscaper to do it for you. 

Reduce most parts of the stump using a chainsaw. 

Manual Removal

Dig the soil around the stump and reveal as many roots as you can. Use a circular saw or an ax to cut through the primary roots while being careful not to damage the cutting blade. Loosen the soil around the stump’s perimeter with a pick-ax and pulling it out until it’s free. Make sure you have room to move around the stump so don’t dig too close to the stump. Use this technique on trees that have shallow root systems. 

Removal with Fire

Another less-hassle method for stump removal is burning it completely. Make several holes into the stump then fill them with fuel or kerosene. It usually takes two weeks before the stump completely absorbs the kerosene. Put a match into each hole and leave it. The stump will burn for a few days, and it will leave you with a hole. Don’t let your children and pets get any close to the stump while it is being consumed by fire. Smoldering a stump is ideal for small stumps or as reinforcement to another approach, such as when you used the manual or chemical method. 

Before doing this method, make sure to check with your city about fire codes to avoid getting fined.

Natural Removal

If you don’t want to go through any of the methods mentioned above, you can use the natural approach. Leave the stump to rot on its own. When the tree is removed, it will gradually decompose over time. You can leave it there in your yard and do nothing. This method is best to use with smaller stumps only. You can use fertilizer or mulch and cover the stump to facilitate fungus and bacterial growth that speeds up decomposition. The stump will eventually reach a point where it is soft and loosened up, making it easier to pull from the ground. 

Pro Tip: A stump can be an eyesore, so while waiting for it to decay, you can put a planter over it and make it look like design rather than a nuisance.   Learn more

Posted on

Tree Removal FAQ

We often receive queries about the nitty-gritty of professional tree removal. Below, we have compiled some of the most common questions asked by our clients and their short and straightforward answers. 

#1 What entails the tree removal process?

Tree experts will use a systematic approach in removing a tree, beginning with the top portion working their way down. Using state of the art equipment, they will cut the tree one branch at a time until they only got the main trunk to deal with. For larger trees, they can use cranes to eliminate branches and limbs safely. The job is done once they have made sure the site is clean and safe again. 

#2 Do I need a permit to remove a tree?

In some cases, yes. There are cities that require a permit before you can remove a tree. Municipalities usually base their decision on the size and location of the tree. Trees that are hazardous and are located in the pedestrian area may need a permit to be eliminated. Your tree contractor will be able to help you obtain whatever permit is necessary. 

#3 Do I have to be home for the removal process?

Not necessarily. You only have to make sure the tree professionals have access to your yard, and they will be able to finish the job without you in the area. 

#4 How much does the service cost?

There is no specific price for tree removal because it changes depending on certain variables. One of the significant factors to consider is the height, as well as the diameter. The present condition of the tree also comes to play. We also look into the accessibility and location of the tree and other circumstances, such as if it is near power lines. The cost can also increase depending on additional services you will add, such as stump grinding and wood chipping. If you live in a remote place, you may also need to pay for travel fees. On a rough estimate, tree removal can cost around a hundred to a thousand dollars. 

#5 Is it okay to remove trees near my house?

Trees always add color to the surroundings and provide much-needed shade on a hot day. However, sometimes, they present dangerous situations that can be prevented with tree removal. Overgrown limbs can touch your roof and cause damage later on. Further, fallen leaves that accumulate through time can cause your roof to rot while invasive roots can be a severe threat to the foundation of your home. 

Removing a tree near a house needs more careful consideration and labor. For this reason, you should only let tree experts do the job. If you are unsure whether your tree has to go or you can leave it be, set an appointment with your trusted tree removal experts. They will be able to provide you with an accurate assessment of the health of your tree so that you can make an objective decision regarding the future of your tree. 

Keep in mind that tree removal is not always the option. Some trees can still be salvaged with proper tree care, so it is best to consult with a professional.  For tree removal Spokane trusts for quality and affordability, call Jim with Grace Tree Service Spokane at (509) 992-1700.  

Posted on

How to Trim a Tree Yourself

While some homeowners are not new to trimming their trees, this topic could be intimidating for those who haven’t experienced doing it themselves. It is crucial to give trees the proper care they need for them to flourish for many years. Sure, it is easy to water, fertilize, and mulch, but trimming is a different story. 

Trimming may seem hard at first, but it is definitely manageable, especially if you know the how to’s of it. However, if trimming would involve large trees, power lines, and other hazardous factors, let the professionals handle it for you. But other than that, you can make it happen on your own. 

If you want to learn the basics of tree trimming, read on for a simple, step-by-step guide to DIY pruning. 

When Should You DIY Tree Trimming and When Should You Not 

If you are looking to trim lightweight branches from a small tree, by all means, do it! But if you plan to trim the canopy of a large tree, you may need to step back and let a certified arborist do it. Don’t attempt to trim a tree when you need to use a ladder to reach its branches. Also, it is dangerous to DIY a trimming project if the tree is under a power line or if it’s too large and heavy for you to handle. 

How to Trim Small Tree Branches Yourself 

Let’s talk about how to prune small branches and eventually, a small tree. Make sure to follow these guidelines:

  • Always use sharp and clean pruning tools.
  • Take time to know your tree’s anatomy. We’ll teach you simple terms that can come in handy when you start your pruning project. The branch collar is the visible swelling that is found at the base of the branch that connects it to the tree. It can be easily seen in some species but may not be the case for some. The branch bark ridge, on the other hand, is found between the branch and the trunk, a little higher than the branch. Imagine the branch to be an arm and the collar to be the underarm while the bark ridge is the shoulder. 
  • Locate the exact spot you’ll prune. Make sure not to cut the branch collar itself because this could lead to serious problems in the future. 
  • Cut the branch you wish to eliminate at a 45-60 degree angle to the bark ridge if it is no more than one inch in diameter.
  • Use the three-cut rule when cutting thick branches. Cut the branch 10-15 inches above the branch collar. Cut midway at the base of the branch, then move a little farther from the cut. Saw off into the top of the branch to let it fall. The final cut should be past the branch collar. 

How to Trim a Small Tree

When you know how to cut small branches, pruning a small tree would be much easier, but there are still some factors that can affect how smooth the process can go:

  • Before cutting, determine which branches you would let go and the ones you’ll keep. Make sure to cut the branches that are growing at a wrong angle and keep those that grow at 60 degrees from the trunk. You should also eliminate branches that grow across the interior of the tree. 
  • How much to cut is also essential to know when pruning a tree. Professionals suggest not to prune more than 25% of a tree’s canopy at the same time. Trim dead twigs and branches as well as water sprouts that usually come in clusters. 
  • If you are pruning a young tree, cut away limbs that compete with the leader branch.
  • Use the steps above to prune branches.

How DIY Trimming Can Go Wrong and Kill a Tree

Correct pruning can go a long way for the health of the tree, but incorrect pruning can be detrimental. One wrong cut may not affect the tree seriously, but doing it too often can. A tree under stress can grow weak and eventually die over time. One of the main reasons for a tree’s decline is too much pruning of the canopy, so make sure not to over trim it. 

Further, cutting the branch collar is also a culprit for a tree’s death. It’s important not to hurt the branch collar to make sure the tree heals naturally after being pruned. If it doesn’t heal well, it could get infected by fungi and severely damage the tree. 

Why You Shouldn’t Attempt Dealing with a Large Tree 

There is a reason why we never recommend homeowners or landowners to prune large trees. It is because pruning larger trees should be left to the professionals. It can be dangerous for an amateur to climb a ladder with sharp pruning tools. If you don’t have enough experience and skills to take on the task, you can fall and hurt yourself. Larger branches may also require the use of heavy equipment that can be difficult to handle for a newbie in gardening.

For more information and tree trimming service, call Jim with Thatcher’s Tree Service Gainesville at (352) 269-1972.